方形逆流玻璃钢冷却塔常熟冷却塔维修

特性说明
1、LYN为方型可联结式组合，充分利用空间，占地节省；产品特殊设计，具有低噪音和高效率之特性。
LYN for square can be associative combination, make full use of space,covers an area of savings; Special product design, and has the characteristicsof low noise and high efficiency.
2、整体结构坚实轻巧，本体及水盘采用强化玻璃纤维（F.R.P）制造，**腐蚀。表面的面漆加紫外线抑制剂，能抵抗阳光侵袭破坏。
The overall structure of the solid, light body and water plate of thereinforced fiber glass (F.R.P) manufacturing, never corrosion. On the surface  of the paint and uv inhibitors, resistant to sunlight damage.
3、所有钢铁材料全部经过热浸镀锌处理，耐腐蚀，经久耐用。
All the steel materials through hot dip galvanized processing, corrosionresistance, durable.
4、特殊设计轴流式风机配以皮带减速机、噪音低、风量足，可加装特制水滴消音毯，消除水声。
The special design of axial fan belt reducer, low noise, air volume, can bemounted to the special water droplets quieter carpet, eliminate water.
5、采用特殊设计PVC收水器（止水器），阻止飞溅效果显着，压降损失轻微，飞溅损失在0.002%以下。
The use of special design PVC water cleaner (water), to prevent splasheffect is remarkable, the pressure drop loss mild, spatter loss below 0.002%.
6、特殊设计散水器，口径大不会阻塞，但散水效果特佳，安装在塔体内部不受外界尘土杂物污染。
Special design aproll, diameter does not block, but aproll efficiency is veryhigh, installed in the interior of the tower body is not polluted by outside dustsundry.
7、采用蜂巢式真空成型散热材，交错排列表面有沟槽，热交换效果特佳。
The honeycomb type vacuum forming heat dissipation material, staggeredsurface groove, the heat exchange efficiency is very high.
8、水盘采倾斜设计，易清洗、装水少，运转重量较低，但水槽特大，不虑吸入空气。
Water dish by tilting design, easy to clean, less water, low weight, but theheavy tank, no worries, inhaled air.




逆流式冷却塔零部件特点介绍LYN型冷却塔部件特点介绍
一、电机    冷却塔电机：1.采用专业防水电机，防护等级达IP55，电机轴镀铬腐，绝缘等级为F级。该电机具低噪音、低振动、宽电压、高效率、密封防水等优点，额定电压：380V，频率50HZ。
The motor    Motor cooling tower: 1. Using professional waterproof motor, protection grade reaches IP55, motor shaftchrome plated anti-corrosion, insulation class F. 2. The electric machines and low noise, low vibration, high efficiency, wide voltage, and the advantages of waterproof sealing, rated voltage: 380 v, 50 hz frequency.
二、风扇    冷却塔**风扇，高级铝合金材质，有宽幅叶片和机翼中空型叶片等设计。风量大、噪音低、效率高、耗能低。设有刻度便于手动调整风扇角度。配合良壹高强度风胴，流线型设计，出风顺畅。
the fan    cooling tower dedicated fan, high aluminum alloy material, there are wide blade and wing type hollow bladedesign. Big air volume, low noise, high efficiency and low consumption. Without dial to manually adjust the Angle of the fan. Cooperate LiangYi high strength the trunk of the wind, streamlined design, smooth out the wind.
三、散水装置
设计方面：采用离心直流喷头，在设计时已考虑消除中空现象，其适用较大的压力变化范围也有较好的喷洒效果，需求压力较低，使用经济。生产工艺方面：采用热注塑成型，不易变形、堵塞，便于清洗；特点：支管上ABS散水头具有提供水流均匀、泵浦扬程低、不易堵塞。此种设计保证散水均匀、性能高及易于安装及维修。
Aproll device design：  adopt dc centrifugal nozzle, has been considered in the design of eliminate the phenomenon of hollow, its applying greater pressure range also has good spraying effects, low demand pressures, with the economy. Production process: the hot injection molding, is not easy to deformation, jam, easy to clean; Features: branch pipe on the ABS aproll head with uniform flow, pump head low, not easy jam. This kind of design to ensure uniform aproll, high performance and easy instalal tion and maintenance.
四、减速机组   采用皮带传动，运转平稳，噪音小。设计皮带箱上下盖保护，不受外界水汽影响。FRP材质，运转安全，便于操作维护。采用高级进口皮带，确保使用强度及寿命。
The reduction unit    adopts the belt drive, smooth operation, low noise. Design the belt box cover to protect from top to bottom, is not affected by external water vapor. FRP material, operational safety, ease of operation and maintenance. Adopt advanced imported leather belt, make sure you use strength and life.
五、壳体  塔体外侧浪板及水盘均采用玻璃纤维强化塑胶（FRP）材质，FRP用耐水性树脂与无碱玻璃纤维毡，浸润性好，含胶量高，强度高，本体表面光洁度高，具有不易褪色，抗老化，抗紫外线，造型美观。入风口装有顺风板，采用高级PVC与工程塑料及抗紫外线剂等材料挤拉成型，密实耐用，对入风加以整流，且具有挡水功能。
Shell    tower body of the lateral wave plate and shell plate are made of glass fiber reinforced plastic (FRP) material, FR P with water resistance resin with non-alkali glass fiber mat, invasive good, high rubber content, high strength, high surface  finish of ontology, is not easy to fade, anti-aging, anti-uv, aesthetically pleasing. Into the tuyere with wind board, USES the advanced PVC and engineering plastics and ultraviolet resistant agent and other materials pultrusion molding, solid and durable, rectifier for into the wind, and have the function of retaining water.
六、填料     高级PVC原生料真空成型，片材厚度均匀，强度及韧性高。选用不透明，抗紫外线材料，结合“良壹”**波形设计，可获得较大换热面积及较佳之气流通过空间，片材之波形与片间距经严格计算及多次测试而得，散热系数高。
Senior     Advanced PVC raw original vacuum forming, sheet thickness, high strength and toughness. Choose opaque, anti-uv material, combined with \"LiangYi\" patent waveform design, can achieve maximum heat exchange area and the best air flow through the space, sheet waveform and the spacing of the strict calculation and test for many times, high coefficient of heat transfer.
七、塔体结构    冷却塔之桁架，采用优质轻型结构，坚固耐用。所有铁件均经热镀锌（H.D.G.S）处理，提高了湿热循环条件下的抗腐蚀能力，使用寿命长。
The tower body structure     The truss of the cooling tower, USES the high quality light structure, strong and durable. All iron, hot dip galvanized (H.D.G.S) treatment improved under the condition of wet and heat cycle corrosion resistance, long service life.